Primer on processing DSLR images with Iris.

Describes how I modified a Canon Digital Rebel XT (a.k.a. 350D) by replacing the internal fixed IR-block filter with clear glass for improved sensitivity while still maintaining normal daylight usage capability

Describes my "SC3"-modified Philips ToUCamPro, including the Peltier-cooled custom enclosure and fabricated cold finger.

Describes my "SC2"-modified Philips VestaPro, including the Peltier-cooled custom enclosure and integrated CCD chamber / cold finger.

Describes my design for a combined CCD chamber and cold finger for use in modified webcams with custom enclosures.

Describes two "SC1"-modified Philips ToUCamPro's, one left in its original shell, and the other in a custom enclosure with Peltier cooling.

Describes my custom enclosure with Peltier cooling for the guts of a modified Connectix Quickcam, to facilitate telescope attachment via a T-ring.

Describes my custom enclosure for the guts of a Philips ToUCamPro, to facilitate telescope attachment via a T-ring.

Describes how I made a Harmann Mask for my 10" LX200 with $1.19 worth of supplies, and some duct tape